BERGHOF DC2004 - 1 General Information; Notes on the Handbook; Symbols and Visual Depictions

USER HANDBOOK 2.0 | DC20XX, ET20XX, ECC21XX SLIM
Berghof Automation GmbH | Harretstrasse 1 | 72800 Eningen | www.berghof.com
Dialog-Controller-DC20XX_EN.docx
7
1. General information
This user handbook is intended for use by qualified personnel and contains information on the assembly,
installation, start-up and maintenance of the device.
1.1. Notes on the handbook
This user handbook is a component of the product and applies to the following devices:
 DC2004 Dialog Controller
 DC 2007 Dialog Controller
 ET2004 Ethernet Terminal
 ET2007 Ethernet Terminal
 ECC2100 Slim Box Controller
 ECC2110 Slim Box Controller
It contains information on the following topics:
 Applications
 Safety
 Mechanical design
 Electrical design
 Connections
 Start-up
 Upkeep and maintenance
 Decommissioning
 Disposal
 Always keep this user handbook available alongside the product.
1.2. Symbols and visual depictions
The following symbols and visual depictions will be used in this handbook:
Symbol
Meaning
 …
List entry
 …
Individual instruction or list of instructions which can be carried out in any order.
1. …
2. …
List of instructions which must be carried out in the order given.
Additional product information