BERGHOF DC2004 - Page 80

USER HANDBOOK 2.0 | DC20XX, ET20XX, ECC21XX SLIM
Berghof Automation GmbH | Harretstrasse 1 | 72800 Eningen | www.berghof.com
Dialog-Controller-DC20XX_EN.docx
80
Ethernet controller
ECC2100 Slim
ECC2110 Slim
5%
Power consumption
typ. 0.3 A, max. 3 A at +24 V DC, fused depending on the load on
the I/O
Protection against reverse
polarity
yes
Voltage failure switching
10 ms at < 20.4 V DC
Ethernet interfaces
No. / type of interface
1x 10/100 Base T
Connection system
RJ45
Protocols
TCP/IP, Modbus TCP, BACnet, Profinet
EtherCAT interfaces
No. / type of interface
1x EtherCAT (EtherCAT master)
Connection system
RJ45
USB interfaces
No. / type of interface
1x host USB 2.0 / USB plug port A
No. plugging/unplugging cycles
max. 1,000
CAN bus interfaces
No. / type of interface
1x CAN bus
2x CAN-bus (CAN0, CAN1)
Protocols
CAN-Bus and/or CANopen master
Serial interfaces
No. / type of interface
1x RS-232;
1 x RS-485
Protocols
Modbus RTU
Additional functions
Real-time clock
yes, with battery back-up
microSD card slot
1x microSD card
I/O
Digital
4x
Digital OUT
4x (0.5 A)
Analogue IN
2x (–10…+10 V, PT100/PT1000 with 2-wire)
2x (–10…+10 V, or return lead for 3-wire)
Battery
Type
Panasonic VL2020 or similar
Lifespan
10 years (depends on operating temperature)