M10
Instruction Manual
10
These are basic precautions that should be followed during the transport of lithium batteries:
IMPORTANT NOTES!
Transport only in special packages with labels and special transport documents specific to current regulations.
Be careful when handling, transporting and packing the batteries so as to avoid short- circuiting.
The batteries comply with the requirements set out in the “UN Manual of Tests and Criteria, Part III,
subsection 38.3” for air transport and with the provisions of the ADR regulations for transport by truck/ship.
Remove the battery from the transmitter before sending the flow meter to BERMAD in case of maintenance
or of any intervention under warranty.
2.3 DATA SAFETY
The M10 meter guarantee the security of the collected and processed data as a result of the internal
memory (EEPROM) on which the data are saved.
The integrated memory allows the storage of data with 100,000 log lines (the data are kept for more than 6
years with factory settings); when the memory is full, the new data will automatically overwrite the old data.
In order to prevent the loss of saved data, and to be able to better manage it on its management systems,
the unit is supplied with a specialized software that allows users to communicate with the electronics of
the M10 via Bluetooth or RS485 communication interfaces, that can be connected to any PC, laptop and/or
tablet with a Windows operating system, it is also possible to interface with the “Mag-Net” mobile software
in iOS and Android smartphones and tablets.
Fast download, data management, easy programming and an advanced self-diagnosis system, that
automatically perform a wide range of essential checks, make the M10 converter a highly ecient and
irreplaceable tool for fluid detection in water management systems.
A multi-level password system also allows controlled access to the data collected and guarantees confidentiality.
To Next Page
Loading...