My bernette Overlocker
16
2020-09 EN 5040064.00A.04
2.2 Overview - standard accessories
Included accessories
Visit www.mybernette.comfor more accessories information.
Illustration Name Purpose
Power Cable and Foot
Control Cable
To connect the machine with the power supply
system and the Foot Control.
Cut-offs Bin To collect resulting scraps.
Knife cover insert To protect the fingers and to deflect the fabric cut-
offs during the sewing process.
Freearm cover To extend the work surface.
Slide-on table To increase the sewing surface.
Free Hand System (FHS) To raise and lower the presser foot.
Overlock Foot For all Overlock Stitches.
For general sewing projects.
Retractable Thread Guide For an even unwinding of the thread from the
thread cones.
To Next Page
Loading...
