Setting up the machine
24
2020-09 EN 5040064.00A.04
Place the spool disc
The Spool Disc ensures the stability of the thread spool and the even unwinding of the thread.
> Place the thread spool on the Thread Stand.
> Push the flat side of the Spool Disc over the Spool Pin to the thread spool.
Using the spool net
The spool net prevents the thread from sliding down from the thread spool and is recommended for special
threads.
• Thin threads, which slide easily off the spool
• Nylon, rayon, silk threads or effect and metallic threads
> Put the spool net over the thread spool from above and pull the thread end upwards.
To Next Page
Loading...
