Setting up the machine
22
2020-09 EN 5040064.00A.04
3.5 Machine covers
The machine covers protect against injuries caused by moving components and prevent fragile elements
from being damaged. All covers must be fitted or closed prior to sewing.
• Needle Threader Cover
• Knife Cover Insert
Open/close the Threader Cover
The Threader Cover protects the inserted looper threads during sewing operations.
> To open the Threader Cover, push it to the right and swing it forward.
> To close the Threader Cover, swing the Threader Cover up until it clicks into place to the left.
If the Threader Cover cannot be closed completely, the Air Threader Connector is still switched on.
3.6 Thread stand
The Thread Stand is placed on the back of the machine. Thread cones, foot spools or household spools of all
sizes can be placed on the Thread Stand.
Attaching the Thread Stand
> To fit the Thread Stand, press the connection points from behind towards the front of the machine (1)
and snap them into place on the right (2) of the machine.
To Next Page
Loading...
