Appendix
77
2020-09 EN 5040064.00A.04
10 Appendix
10.1 Storing and transporting the machine
Storing the machine
The correct storage of the machine over a longer period of time has an influence on its lifespan and
functionality.
> Don't store the machine outdoors.
> Protect the machine against climatic influences.
> Before operating the machine again after storage, leave the machine unpacked for approx. 1 h at room
temperature.
Transporting the machine
For a relocation or a longer transport of the machine, the following actions should be carried out.
> Retract the Retractable Thread Guide of the Thread Stand completely downwards.
> Lower the presser foot.
> Remove all connecting cables.
> Lift and transport the machine at the carry handle.
10.2 Maintenance and cleaning the machine
NOTICE
Damage by cleaning with compressed air
Cleaning using aerosol sprays or compressed air may cause permanent damage to your machine. A repair
by the Authorized bernette dealer is required.
> Remove fabric scraps and thread remnants using a vacuum cleaner with soft tip.
Cleaning the machine
The service life of the machine depends on the care and maintenance. Based on normal household use, an
annual service at the Authorized bernette dealer is recommended.
Recommended aids for cleaning:
• Damp cloth
• Brush
• Tweezers
• Vacuum cleaner with soft tip
> The machine can be cleaned with a damp cloth without detergent.
> Free the sewing area from fabric and thread scraps regularly after sewing.
• Needle, Needle Bar
• Presser Foot
• Feed Dog (from above)
• Knife
• Freearm interior
To Next Page
Loading...
