9
Machine Setup
• Wind the thread clockwise around the bobbin winder
tension disc.
• Insert the thread end through one of the inner holes in
the bobbin as illustrated and place the empty bobbin
on the spindle.
• Push the bobbin to right.
If using special thread which winds quickly off the spool
attach a net to the spool before using and use the larger
spool holder. Reduce the thread tension if necessary.
Winding the Bobbin
• Place the thread and spool holder onto the spool pin.
For smaller spools of thread use the small spool holder.
• Snap the thread into the upper thread guide.
To Next Page
