67
Special Functions
Sewing
s must be purchased separately. They are not
include with this machine.
Make sure that the two threads used to thread the
are of the same weight.You can use one or two
colors.
• Insert the .
• Use only assemblies with max. 2mm
needle distance (i.e. bernette part number
502020.62.91).
• Follow the instructions for single-needle threading
using the horizontal spool pin.
• Thread through the left needle.
• Insert the spool pin (included with the accessories) in
the hole on the top of the machine.
• Thread along the same path, and make sure NOT to
omit the thread guide above the needle and pass
thread through the right needle.
• Thread each needle separately.
• Select a pattern. (E.g. A Groupe Pattern 13)
• All stitch patterns can be used with except
for Direct Group Patterns 0 and A Group Patterns
86-99.
When using , use the Zigzag foot.
Twin Needle
Twin needle
Twin needle
Twin needles
Twin needle
Twin
needle
Twin Needle
To Next Page
Loading...
