Bernette Chicago 5 - Darning Stitch

49
Basic Sewing Procedures
A-98: Simple darning stitch in thin and medium fabrics
A-99: Reinforced darning stitch in heavy fabrics
• Select the A Group Patterns 98 or 99 to obtain the
darning stitch.
• Change to the buttonhole foot.
Baste the upper fabric and the under fabric together.
• Select the needle position.
• Lower the presser foot over the center of the tear.
• Pull the button holder to rear.
• Adjust the button guide plate on the buttonhole foot to
the desired length.
The size of one darning sequence is variable.
However, the maximum sewing length is 2.6cm (1 inch) and
the maximum sewing width is 7mm (9/32 inch).
A The length of sewing.
B The width of sewing.
C Start
D Stop
Darning Stitch
A
B
C
D
D
A-98
A-99
E
A
B
C
D
D
A-98
A-99
E
A
B
C
D
D
A-98
A-99
E
A
B
C
D
D
A-98
A-99
E