Bernette Chicago 5 - Bartack Stitch

47
Basic Sewing Procedures
• Extend the button guide plate and set to the desire
bartack length.
• Adjust the stitch width and stitch length to personalize
the stitches.
• Position the fabric so that the needle is 2mm (1/16
inch) in front of the pocket opening and then lower the
presser foot lever.
A Starting point
• Lead the upper thread down through the hole in the
presser foot.
• Pull down the buttonhole lever and position it behind
the bracket on the buttonhole foot.
• Gently hold the end of the upper thread in your left
hand and start sewing.
Sewing procedure for bartack is illustrated.
This is an example of sewn bartacks at pocket corners.
1.0~3.00.4~1.0
A-94
D
A
1.0~3.00.4~1.0
A-94
D
A
1.0~3.00.4~1.0
A-94
D
A
1.0~3.00.4~1.0
A-94
D
A
1.0~3.00.4~1.0
A-94
D
A
Bartack stitch