78
Special Functions
• Press the memory button to enter the Memory Mode.
• Use the arrow buttons to choose the desired Memory
file.
• Press the OK button to enter the selected Memory file.
– The cursor stays at the first position.
• Use the arrow buttons to select the stitch that should
be replaced or have its parameters changed.
• To change the stitch press the clr button and then
press the pattern group selection button to choose a
new stitch.
• To change its parameters press the stitch length, stitch
width, mirror image,
or elongation button.
Memory Editing functions - Change a stored stitch or its parameters
Requirement: with existing patterns in Memory.
twin needle
To Next Page
Loading...
