84
Warnings
Warning message Warning display
Bobbin thread is low
This message is displayed when the bobbin thread is
running out.
BH lever is not lowered
This message is displayed when the buttonhole or
darning stitch was selected and the start/stop button
was pressed while the buttonhole lever is raised.
BH lever is not lifted
This message is displayed when the stitch other than the
buttonhole or darning stitch was selected and the start/
stop button was pressed while the buttonhole lever is
down.
Press the OK button to confirm
The sewing machine is blocked
The exclamation message means that the thread is
twisted or jammed or the fabric is too thick and the hand
wheel cannot move.
• Please look through the «Trouble shooting guide» on
page 88-90 to resolve the problem.
To Next Page
Loading...
