129
Overview Display
Parking the embroidery module
█
remove embroidery hoop
►
the embroidery arm travels horizontally to the left to
the park position
█
change to the sewing mode
Sewing is possible even with the embroidery module
attached.
Check hoop and motif size
►
the attached hoop moves vertically (lengthwise), to
be read by the computer
►
the motif size is traveled by the four arrow icons
In a design combination, the stitching area of the
combination and each individual design may be
checked.
█
select desired motif within a combination
█
touch «Back»-icon 2x
►
the «Edit»-display appears
►
the attached hoop is shown in the Display as well
as in the «Select hoop»-icon
►
if no hoop or a too small hoop was attached, an
error message will appear
To Next Page
