Bernina 770 QE - 6.11 Finishing edges

Practical stitches
101
6.13 Narrow edgestitching
> Attach the Blindstitch foot No.5 (optional accessory) or the Reverse pattern foot No.1C or the Edge
stitch foot No.10/10C/10D (optional accessory).
> Touch the icon «Practical stitches».
> Select the Straight stitch No. 1.
> Place the edge on the left against the guide of the Blindstitch foot.
> Select the needle position left at the desired distance to the edge.
5/8
5/85/8
1
25
15 15
15
75
75
6.14 Wide edgestitching
> Attach the Blindstitch foot No.5 (optional accessory) or the Reverse pattern foot No.1C or the Edge
stitch foot No.10/10C/10D (optional accessory).
> Touch the icon «Practical stitches».
> Select the Straight stitch No. 1.
> Guide the edge along the presser foot or at a distance of 1 – 2.5 cm along the marks on the stitch plate.
> Select the needle position at the desired distance to the edge.
5/
8
5
/
85/
8
25 15 1
5
1
5
75
75
6.15 Edgestitching using the seam guide
When sewing parallel wider lines, it is recommended to guide the seam guide along the sewn of lines.
> Attach the Reverse pattern foot No. 1C or the Edge stitch foot No. 10/10C/10D (optional accessory).
> Touch the icon «Practical stitches».
> Select the Straight stitch No. 1.
> Loosen the screw on the back of the presser foot.
> Insert the seam guide into the hole of the presser foot.
> Adjust the width as desired.
> Tighten the screw.