Bernina 770 QE - Foot Control; Regulating the Speed Via the Foot Control; Raising;Lowering the Needle; Programming the Foot Control Individually

Sewing preparation
36
2.3 Foot control
Regulating the speed via the foot control
Via the foot control the speed is infinitely variable.
> Press the foot control down carefully to start the machine.
> To sew faster, press the foot control harder.
> Release the foot control to stop the machine.
Raising/Lowering the needle
> Sink the heel back on the foot control to raise/lower the needle.
Programming the foot control individually
The foot control, i.e. the back kick function can be programmed individually (see page57).