My BERNINA
25
Illustration Name Purpose
Foot control To start and stop the machine.
To control the sewing speed.
Use of the power cable (only USA/Canada)
The machine has a polarized plug (one blade wider than the other). To reduce the risk of electrical shock, this
plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the
plug in any way!
Overview presser feet
Supplied standard presser feet
Illustration Number Name Purpose Example
# 1C Reverse pattern foot To sew various
practical and
decorative stitches.
To sew forward and in
reverse.
# 1D Reverse pattern foot To sew various
practical and
decorative stitches
with Dual Feed.
To sew forward and in
reverse.
# 3A Automatic Buttonhole
foot with slide
To sew buttonholes
automatically.
# 4D Zipper foot To sew in zippers with
Dual Feed.
# 20C Open embroidery foot To sew appliqués and
decorative patterns.
To Next Page
