BestCode NExT 86 - Adjust Screen

BestCode Next Series 8 Technical Manual October 2022 Page 45 of 290
Adjust Screen
The Adjust screen allows the operator to adjust message settings.
Width
Increases or decreases the length of the message
by stretching or shirnking the print
0-1000
Height
Increases or decreases the height of the print by
increasing or decreasing the strength of the high
voltage field in the printhead.
0-10
Delay
Increases or decreases the time between
receiving a print trigger and print occuring.
0-4,000,000,000
Rotation
Rotates the direction that the print appears on
the product
Normal, Mirror, Flip, Mirror Flip
Bold
Each settings increases the width of the selected
field by adding more printed drops. Makes darker
print.
0-9
Speed
Used to increase the maximum print speed.
Fast
Best Quality
Fastest
Higher Speed, OK Quality
Faster
Faster than Fast, Good Quality
Ultra-Fast
Fastest Print, Readable Code
Gap
Increases the space between characters in the
selected field.
0-9
Pitch
Specifies the delay between repeated prints.
0-4,000,000,000