4-18 BL-E30-0515 - 03-01-2018
Table 4-4 Programmable Parameters - Continued
LED
CODE
PROGRAMMER
LCD DISPLAY
POSSIBLE CAUSE FAULT CLEARANCE
7 Throttle Fault PotLow and /or PotWiper out of range 1. Throttle input wire open or shorted.
2. Throttle pot defective.
3. Wrong throttle type selected.
2 Undervoltage Fault Battery voltage too low 1. Battery voltage <17 volts.
2. Bad connection at battery or control-
ler.
6 Wiring Fault HPD fault present >10 sec. 1. Misadjusted throttle.
2. Broken throttle pot or throttle mecha-
nism.
To Next Page
Loading...
