10
DAMAGED EQUIPMENT POLICY
Safety Statement
At Bil-Jax, we are dedicated to the safety of all users of our products. Therefore,
all Bil-Jax lifts are designed, manufactured, and tested to comply with current
applicable Federal OSHA and ANSI codes and regulations.
Damage Policy
There may be occasions when a Bil-Jax lift is involved in an incident that results
in structural damage to the lift. This can seriously compromise the ability of the lift
to perform in a safe manner. Therefore, whenever a Bil-Jax lift is damaged
structurally or when there is the possibility of structural damage (this damage
may be internal and is not always visible to the naked eye), Bil-Jax requires that
the lift be returned to our facility at 125 Taylor Parkway, Archbold, Ohio, for
reconditioning. If you have any questions concerning what constitutes structural
damage, please call the Bil-Jax Service Department at 800-537-0540.
Damage Repair Notice
There may be occasions when a Bil-Jax lift is involved in an incident resulting in non-
structural damage. When this occurs and repairs are made by the owner or area
distributor, please notify Bil-Jax of these non-maintenance repairs and request a repair
form to be filled out and returned to Bil-Jax.
To Next Page
Loading...
