Binatone iDECT C10i Single - To Lock;Unlock the Keypad; Using the Redial List

14
 
You can lock the keypad so that it cannot be used accidentally while
carrying it around.
In idle mode, press and hold the <STAR/*> key for 1 second to lock the keypad
and show  on the display.
To turn the keypad lock off, press and hold <STAR/*> again.
 Incoming calls can still be answered even if the keypad is locked.
 
The redial list stores the last 10 numbers dialled, up to a maximum of 20 digits.
 
Press <REDIAL> in idle mode and then press <UP/DOWN> to browse the
redial list. The most recent last number dialled will appear rst in the redial list.
 
1. Press <REDIAL> in idle mode to go to the redial list.
2. Press <UP/DOWN> to select an entry.
3. Press <MENU/OK> to display 
Press <MENU/OK> key to display 
Enter the name of the contact (maximum 14 characters) and then press
<MENU/OK> to display 
Modify the number, if necessary, using<DEL/INT> to delete digits.
7. Press <MENU/OK> to save the entry, and return to the redial list.
 
1. Press <REDIAL> in idle mode to go to the redial list.
2. Press <UP/DOWN> to select an entry and then press <MENU/OK>.
3. Press <UP/DOWN> to select  and then press
<MENU/OK> to show 
4. Press <MENU/OK> again to conrm, with a conrmation beep played.
 
1. Press <REDIAL> in idle mode to go to the redial list.
2. Press <MENU/OK>.
3. Press <UP/DOWN> to select  and then press
<MENU/OK>
4. Press <MENU/OK> again to conrm and display  with a
conrmation beep played.