Binatone iDECT C10i Single - Caller Display (Network Dependent); Access the Call Log; Save a Call Log Entry into the Phonebook; Delete a Call Log Entry

19
 
This feature is available if you have subscribed to the Calling Line
Identication service with your network service provider. Caller ID lets you see
the phone numbers of your callers on the handset display, before you answer
and in your Call Log afterwards. The Call Log stores the last 40 different
calling numbers, whether or not you answered the call, so you can call them
back later.
Only the most recent call is saved if there are repeat calls from the same
number. When the Call Log is full, the next new call will replace the oldest entry.
If you’ve got a new call in the Call Log, the Caller Display icon will ash
on the handset display and it will show  to indicate the
number of new calls received.
If the received number is the same as one in your phonebook, the name
from the phonebook will display as well as the number, when the call is
received and in the Call Log.
 
Press <CALLS / UP> in idle mode and press <UP/DOWN> to step through
the call list. The calls are displayed in chronological order with the most
recent call at the top of the list.
 
1. Press <CALLS / UP> in idle mode to go to the call list.
2. Press <UP/DOWN> to select an entry.
3. Press <MENU/OK> to show  and then press
<MENU/OK> to select.
4. Enter the name for the contact (maximum 14 characters) and then
press <MENU/OK> to conrm.
5. Edit the number, if necessary, using <DEL/INT> to delete digits, and
then press <MENU/OK> to save.
 
1. Press <CALLS / UP> in idle mode to go to the call list.
2. Press <UP/DOWN> to select an entry and then press <MENU/OK>.
3. Press <UP/DOWN> to select  and then press <MENU/OK> to
show 
4. Press <MENU/OK> again to conrm, and the entry is deleted.