21
Your phone comes with a selection of settings that you can change to
personalise your phone to the way you like it to work.
If you subscribe to Caller Display, the time and date settings will be
automatically updated by the network when you receive an incoming call.
You can also set the date and time manually.
( The Caller Display service only sends the month and date, not the
year, so you may still want to set the year.)
1. Press <MENU/OK>.
2. Press <UP/DOWN> to select and then <MENU/OK>.
3. Press <MENU/OK> again to select .
4. Enter the current month, day and year in the date format set (see 7.1.2).
For DD/MM format, enter 16 May 2010 as [1], [6], [0], [5], [1], [0].
5. Press <MENU/OK> to conrm.
6. Enter the current hour and minute in the time format set (see 7.1.1).
In 24 hour format, enter 1:30pm as [1], [3], [3], [0].
In 12 hour format, press <UP/DOWN> to select AM or PM.
7. Press <MENU/OK> to conrm.
The time can be displayed either as 12 hour or 24 hour. The default setting
is 24 hour. To change your setting:
1. Press <MENU/OK>.
2. Press <UP/DOWN> to select and then <MENU/OK>.
3. Press <UP/DOWN> to select and then press <MENU/OK>.
4. Press <MENU/OK> again to select .
5. Press <UP/DOWN> to select the desired setting (12 HOURS or 24
HOURS) and then press <MENU/OK> to conrm.
The date can be displayed either as Month/Day or Day/Month. The default
setting is Day/Month. To change your setting:
1. Press <MENU/OK>.
2. Press <UP/DOWN> to select and then <MENU/OK>.
3. Press <UP/DOWN> to select and then press <MENU/OK>.
4. Press <UP/DOWN> to select and then press <MENU/OK>.
5. Press <UP/DOWN> to select the desired setting (or )
and then press <MENU/OK> to conrm.
To Next Page
Loading...
