28
1. Press <MENU/OK> and <UP/DOWN> to select
2. Press <MENU/OK> to show the rst entry, or if the list is
empty.
3. If it is not showing press <MENU/OK> to display
4. Press <MENU/OK> again, then enter the number you want to block.
5. Press <MENU/OK> to save the number in the Block List.
1. Press <MENU/OK>.
2. Press <UP/DOWN> to select and then press <MENU/OK>.
3. Press <UP/DOWN> to browse through the block list.
1. Press <MENU/OK> and <UP/DOWN> to select
2. Press <MENU/OK> to show the rst entry.
3. Press <UP/DOWN> to nd the number you want to change.
4. Press <MENU/OK> then <UP/DOWN> to select
5. Press <MENU/OK> and edit the number, using <DEL/INT> to delete
digits and the keypad to add them.
6. Press <MENU/OK> to save the new number in the Block List.
1. Press <MENU/OK> and <UP/DOWN> to select
2. Press <MENU/OK> to show the rst entry.
3. Press <UP/DOWN> to nd the number you want to delete.
4. Press <MENU/OK> then <UP/DOWN> to select
5. Press <MENU/OK> to show
6. Press <MENU/OK> again to remove the number from the Block List.
1. Press <MENU/OK> and <UP/DOWN> to select
2. Press <MENU/OK> to show the rst entry.
3. Press <MENU/OK> then <UP/DOWN> to select
4. Press <MENU/OK> to show
5. Press <MENU/OK> again to delete all Block List numbers.
When mode is activated, all incoming calls will
be silent. This feature only silences the ringer, and the incoming number,
if you have subscribed to the caller ID service from your telephone service
provider, will be recorded in the caller ID history as normal, and if the
answering machine is turned on it will answer the call as normal.
To Next Page
Loading...
