40
1. If your answering system is off, it will answer your call after 10 rings and
play your ANSWER ONLY announcement, so you can still access the
system remotely, provided the Remote Access is activated, see 8.7.3.1.
2. If you enter an incorrect Remote Code, you will hear a triple error
beep, and you will need to enter the code again. If you enter the
wrong Remote Code twice consecutively, the line will be released
automatically.
3. If you have forgotten the Remote Code, you can check it from the
option in the menu, see 8.7.3.3.
4. The < # > can be entered at any time after the OGA starts, and the
4-digit Remote Code should follow without any delays.
5. During Remote Access, press the following keys to carry out your
desired function:
You can currently only select ENGLISH for the Answering machine pre-
recorded outgoing announcement language on this model. The default
setting is . To change the voice prompt language, if options were
available:
1. Press <MENU/OK>.
2. Press <UP/DOWN> to select and then press <MENU/OK>.
3. Press <UP/DOWN> to select and then press <MENU/OK>.
4. Press <UP/DOWN> to select and then press <MENU/OK>.
5. Press <UP/DOWN> to select the desired language and then press
<MENU/OK> to conrm your choice.
Touch-tone keys Remote command
1 Play the previous message.
2 Play/Stop messages.
3 Skip to the next message.
4 Turn the answering system on or
off.
0 Delete the current message.
To Next Page
Loading...
