Binatone iDECT C10i Single - Alarm Settings

22
 
An alarm can be programmed on a handset, to sound at a set time only
once or repeated each day.
When an alarm is set the alarm icon is shown on the handset display.
When the alarm time is reached,  and the alarm icon ash on the
display, and the alarm tone sounds for 1 minute, at the same volume setting
as the handset ringer, unless the ringer is off, in which case it will ring at
volume setting 1.
When the alarm tone sounds, you can press any key on the handset to stop
the tone, even if the keylock is enabled.
1. Press <MENU/OK>.
2. Press <UP/DOWN> to select  and then press
<MENU/OK>.
3. Press <UP/DOWN> to select  and then press <MENU/OK>.
4. Press <UP/DOWN> to select the desired alarm option from: 
  Turn alarm off
  The alarm sounds once at the set time.
  The alarm sounds daily at the set time.
5. Press <MENU/OK> to select the option.
6. If  or  is selected, enter the desired hour and minute
and press <UP/DOWN> to select AM or PM if the time is in 12 hour
format.
7. Press <MENU/OK> to conrm the alarm setting.
 
You can select from 3 alarm melodies.
1. Press <MENU/OK>.
2. Press <UP/DOWN> to select  and then press
<MENU/OK> .
3. Press <UP/DOWN> to select  and then press <MENU/OK>.
4. Press <UP/DOWN> to select the desired alarm tone (each tone will
sound as it is selected) and then press <MENU/OK> to conrm.