Binatone iDECT C10i Single - Set the Key Tone; Rename the Handset; Set the Display Language; Set the Equalizer

24
 
The handset emits a tone with each key press.
You can choose to turn this tone on or off. The default setting is .
To change the key tone setting:
1. Press <MENU/OK>.
2. Press <UP/DOWN> to select  and then press
<MENU/OK>.
3. Press <UP/DOWN> to select  and then press <MENU/OK>.
4. Press <UP/DOWN> to select  or  and then press <MENU/OK>
to conrm.
 
1. Press <MENU/OK>.
2. Press <UP/DOWN> to select 
3. Press <MENU/OK> to show  and then press
<MENU/OK>. The current handset name is displayed.
4. Change the name, using <DEL/INT> to delete letters and the keypad to
add them (maximum 12 characters) and press <MENU/OK> to
conrm the new name.
 
You can select 
 as the display language. The default
setting is ENGLISH. To change the display language:
1. Press <MENU/OK>.
2. Press <UP/DOWN> to select  and then press <MENU/OK>.
3. Press <UP/DOWN> again to select  and then press
<MENU/OK>.
4. Press <UP/DOWN> to select the desired setting and then press
<MENU/OK> to conrm your chosen language.
 
This feature allows you to change the balance of the audio of the handset to
best suit your hearing.
1. Press <MENU/OK>.
2. Press <UP/DOWN> to select  and then press <MENU/OK>.
3. Press <UP/DOWN> to select  and then press <MENU/OK>.
4. Press <UP/DOWN> to select from  or .
5. Press <MENU/OK> to conrm your choice.