Binatone iDECT C10i Single - Reset Your Phone

30
 
1. Press <MENU/OK>.
2. Press <UP/DOWN> to select .
3. Press <MENU/OK> to show  and then press
<MENU/OK>.
4. Modify the displayed , if necessary, using <DEL/INT> to delete digits
and the keypad to enter new ones.
5. Press <MENU/OK> to show  and then <MENU/OK> to select.
6. Press <UP/DOWN> to select or  and then <MENU/OK>
to conrm. If it has been turned ON,  will be shown on
the display when the handset returns to standby mode.
 
1. Press MENU/OK>.
2. Press <UP/DOWN> to select 
3. Press <UP/DOWN> to show and then press <MENU/OK>.
4. Modify the displayed , if necessary, using <DEL/INT> to delete digits
and the keypad to enter new ones.
5. Press <UP/DOWN> to select  and then press <MENU/OK>.
6. Press <UP/DOWN> to select ,  or and
press <MENU/OK> to conrm.
7. Enter the number you want to bar (up to the rst 4-digits) and then
press <MENU/OK> to conrm.
8. Repeat steps 6 and 7 if you want to set more barred numbers.
 
This feature allows you to restore all system settings, except the answering
machine messages and phonebook, to default settings. This feature could
be useful, for example, if you have forgotten the System  to access the
answering system remotely.
1. Press <MENU/OK>.
2. Press <UP/DOWN> to select  and then press <MENU/OK>.
3. Press <UP/DOWN> to select  and then press <MENU/OK>.
4. Press <MENU/OK> again to conrm the reset.
All settings under the 

and   menus in the handset will be restored to default
settings,and the redial list and call log will also be cleared for the whole
system.