Binatone iDECT V2i System - Making and Answering Calls

12
Date and time
To set the date and time:
1
M
Press the MENU/OK button
! Display shows
Main Menu > Phonebook
2
d Press the D button ONCE
! Display shows Main Menu > Set Date/Time
3
M
Press the MENU/OK button
! Display shows 00:00 01/01 > Set Date/Time , with
the first digit of the time flashing.
4
M
Key in the time and date in the format HH:MM
DD/MM then press the MENU/OK button
Remember to use the 24-hour clock and to
include any 0s (zeroes) - for example, 9:30 am is
09:30 ; 6:05 pm is 18:05 .
5
M
Press the MENU/OK button
! Any other handsets that have been registered
will be automatically updated.
6
f
Press the HANG UP button to go back to
standby mode
iDect_V2i_IFU_master.book Page 12 Thursday, March 27, 2008 2:54 PM