6
Installation and set-up
1
Choose a suitable
site for the base
unit
See page 4
2 Connect the
mains power
lead and the
telephone line
cord into the
back of the
base unit
3 Plug the mains adapter
into a 230 V AC, 50 Hz
mains socket, with the
switch on the socket set
to OFF
4 If you have one or more charger pods …
Plug the mains adapter into a 230 V AC,
50 Hz mains socket, with the switch on the
socket set to OFF
5 Switch on at the mains socket(s)
Use the telephone line
cord supplied with your
iDECT V2i —
do not use any other
telephone line cord
See the note
on page 4
iDect_V2i_IFU_master.book Page 6 Thursday, March 27, 2008 2:54 PM
To Next Page
Loading...
