28
Using a multi-handset system
New Call tone When you are on an intercom call and an
outside call comes in, you’ll hear New Call tone
to tell you that someone is calling you.
To answer the outside call and end the intercom
call:
!
o
Press the PHONE button briefly
! The intercom call will be disconnected and
you will be connected to the outside call.
To page all
handsets from
the base unit
To make all registered handsets ring (this is
useful if you’ve forgotten where you put a
handset):
1
V
Press the HANDSET LOCATOR button on
the base unit
! The handsets ring for up to 30 seconds and
their displays show
Paging...
.
To stop the ringing before 30 seconds:
!
V
EITHER press the HANDSET LOCATOR
button again
!
.
OR press any button on any handset
iDect_V2i_IFU_master.book Page 28 Thursday, March 27, 2008 2:54 PM
To Next Page
Loading...
