Help Line: 0845 345 9677 (Local Call rate) 27
Using a multi-handset system
To toggle
between two
calls
When you have made or answered an outside
call and then made an intercom call, you can
toggle from one to the other, like this:
!
I
Press the INT button to speak to each in turn,
putting the other on hold
f
You can transfer the outside call to the other
handset by pressing HANG UP while you’re
connected to the intercom call
If you press HANG UP while you’re connected
to the outside call, you’ll disconnect it.
To set up a
three-way
conference
1
Make or answer an outside call
2
I
.
Press the INT button to start intercom mode
then key in the number of the other handset
! The outside call is put on hold and the other
handset rings.
When the other user answers:
3
I
Press and hold the INT button for one second
! Display shows
Conference
To end the
conference
!
f
Press the HANG UP button
! You will drop out of the conference call,
leaving the other user connected to the outside
call.
iDect_V2i_IFU_master.book Page 27 Thursday, March 27, 2008 2:54 PM
To Next Page
Loading...
