Help Line: 0845 345 9677 (Local Call rate) 45
Custom settings
The master PIN The Master PIN (personal identity number, or security
code) is required when handsets are registered and
deregistered, and when important changes to the settings
are made. (Note: The answering machine remote access
PIN is different to this master PIN.)
The default setting for the PIN is 0000. To protect your
handset’s settings, we recommend that you change it to
a four-digit number you’ll easily remember.
To change
the PIN:
1
M
Press the MENU/OK button
! The display shows
Main Menu
>
Phonebook
2
d Press the D button THREE times
! The display shows
Main Menu
>
Advanced Set
3
M
u
Press the MENU/OK button then the U button
TWICE
! Display shows
Advanced Set
>
Change PIN
4
M
Press the MENU/OK button
! Display shows
Enter New PIN
5
.
M
Key in the new PIN number and press the
MENU/OK button
! Display shows
Confirm PIN
6
.
M
Key in the PIN again and press the MENU/OK
button
! You will hear a long confirmation beep and
the display briefly shows
New PIN Stored
7
B
f
Use the BACK button to exit the menu or press
HANG UP to go to standby mode
iDect_V2i_IFU_master.book Page 45 Thursday, March 27, 2008 2:54 PM
To Next Page
Loading...
