Help Line: 0845 345 9677 (Local Call rate) 25
Using a multi-handset system
If you have an iDECT V2i multi-handset system, you
already have more than one handset registered to your
base unit. You can register additional handsets — up to
four per base unit. With two or more handsets, you
can:
■ make intercom calls from one handset to another
■ transfer an outside call from one handset to another
■ toggle between an outside call and an intercom call
■ set up a three-way conference call
Each handset’s number (1 to 4) is shown on its display.
Only one handset can be connected to the outside
line at once. If you try to make a call while another
handset is already on the line, you’ll hear Busy tone.
To make an
intercom call
1
I
Press the INT button.
! The numbers of the available handsets will be
displayed
2
.
Press the handset number you want to call. If
you choose handset 2, your handset displays
Calling Handset 2
.
! The other handset rings, and its display
shows
Call From: Handset 1
(if your handset is
number 1). When the other handset user
answers, you’ll be connected and the displays
will show
Intercom
with the number of the other
handset.
To end an
intercom call
!
f
On either phone, press the HANG UP button or
replace the unit in the base unit or charger pod
iDect_V2i_IFU_master.book Page 25 Thursday, March 27, 2008 2:54 PM
To Next Page
Loading...
