30
Answering machine setup
The outgoing
message
The telephone is supplied with two predefined outgoing
messages (OGM). One is for use in Answer Only mode
and one for use in Answer & Record mode.
■ Both of these can be replaced with your own pre-
recorded message if you prefer.
■ To pre-record an outgoing message you must first
follow the procedure to set the answer mode
To record a
new outgoing
message:
After setting the answer mode you can choose
between using a predefined outgoing message
or using a personalised one that you have
recorded. If you select
Personalised
you will then
need to record a new message.
1
Follow steps 1 to 5 on page 29
! Display shows
Select mess.
>
Predefined
2
d
M
Press the D button to select
Personalised
and
press the MENU/OK button
! Display shows >
Play message
3
M
Press the MENU/OK button to play the existing
message
4
d
M
Press the D button and the MENU/OK button
to record a new message
! Display shows >
Record mess.
5
Speak clearly into the handset
6
M
Press the MENU/OK button to end the
recording. Your message will play back
automatically.
! Display shows
Select mess.
>
Personalised
7
M
If you are not happy with the result, repeat from
step 2.
iDect_V2i_IFU_master.book Page 30 Thursday, March 27, 2008 2:54 PM
To Next Page
Loading...
