Binatone iDECT V2i System - Call Screening; To Switch Call Screening on or off

32
Answering machine setup
Call Screening The call screening function allows you to listen to
incoming messages as they are recorded so you can
decide if you would like to take the call.
■ The telephone is supplied with call screening switched
on, but you can switch it off if you want.
■ When call screening is switched on, handset 1
loudspeaker will turn on automatically while the
answering machine is recording an incoming
message.
To switch call
screening on or
off:
1
M
u
Press the MENU/OK button ONCE then the U
button ONCE
! Display shows Main Menu > Answ. Machine
2
M
u
Press the MENU/OK button then U ONCE
! Display shows Answ. Machine > Settings
3
M
d
Press the MENU/OK button ONCE then D
TWICE
! Display shows Settings > HS Screening
4
M
Press the MENU/OK button
! Display shows HS Screening > Off (or On )
5
u Press the U or D button to select Off or On
6
M
Press the MENU/OK button to confirm the
change
7
B
f
Use the BACK button to exit the menu or press
HANG UP to go to standby mode
iDect_V2i_IFU_master.book Page 32 Thursday, March 27, 2008 2:54 PM