Help Line: 0845 345 9677 (Local Call rate) 57
Registration
failed?
If registration has failed, the handset’s display will show
Registration failed
for a few seconds then return to
standby mode.
If this happens, try again, making sure you don’t leave
too long between steps. If you still can’t register the
handset, contact the Help Line for advice.
To de-register
a handset
You may need to do this in order to replace a
faulty handset.
You can de-register the handset you are
using. If you do this you will need to register
it again.
1
M
Press the MENU/OK button
! The display shows
Main Menu
>
Phonebook
2
d Press the D button THREE times
! The display shows
Main Menu
>
Advanced Set
3
M
d
Press the MENU/OK button then the D button
THREE times
! Display shows
Advanced Set
>
Unregister
4
M
Press the MENU/OK button
! The display shows
Enter PIN
The PIN is 0000 unless you’ve set a new one
(see page 45)
5
.
M
Key in the PIN and press the MENU/OK button
iDect_V2i_IFU_master.book Page 57 Thursday, March 27, 2008 2:54 PM
To Next Page
Loading...
