Binatone iDECT V2i System - To De-Register a Handset; To Register to a Different Brand of Base Unit

58
Registering new handsets
6
.
M
Select the handset number you want to
deregister then press the MENU/OK button
! You will hear a long confirmation beep and
the handset returns to standby mode. The
display of the de-registered handset shows
Unregistered
To register to a
different brand
of base unit
Your iDECT V2i can be registered to any GAP-
compatible base unit; or your can register other GAP-
compatible handsets to your iDECT V2i base unit.
But we do not guarantee that all features or display
messages will be available using other
manufacturers’ equipment.
1
Follow the instructions in the base unit’s User Guide to
put the base unit into registration mode.
2
Follow the instructions in the handset’s User Guide to
register the handset (see “To register a new handset” on
page 56). If you need to enter a PIN for the base unit,
refer to the base unit’s User Guide.
iDect_V2i_IFU_master.book Page 58 Thursday, March 27, 2008 2:54 PM