Binatone iDECT V2i System

To Next Page

To Previous Page

Help Line: 0845 345 9677 (Local Call rate) 39

Remote operation

iDECT V2i

Remote operation

Using a tone-dialling phone, dial your home number and

wait for the answering machine to answer

While your outgoing message is playing enter # and

your remote PIN code.

The default code is 123. For details of how to set a new code,

see the User Guide.

The outgoing message will stop playing and you will hear

a confirmation beep

Press 2 to start message playback

You can also use other keys as follows

iDect_IFU_14_Remote operation.fm Page 39 Monday, March 31, 2008 3:24 PM

Main Page

Buttons and Functions3
The Idect V2I Has a REN of 1, and most Other Telephones Have a REN of4
Table of Contents5
Read These Notes First7
Charger Pod7
Radio Signals between Handset and Base Unit7
Mains Power Connection7
If You Have a Broadband Line8
Installation and Set-Up9
Before You Start12
Electrical Safety12
Interference12
Out of Range' Warning12
Switching on and off13
To Lock the Keypad13
Your Handset's Name14
To Change the Name14
Date and Time15
Ringer Volume and Melody16
Making and Answering Calls18
Using the Speakerphone18
To Make a Call18
To Answer a Call18
To End a Call18
Earpiece Volume19
To Mute the Mouthpiece19
Last Number Redial (LNR)19
To Store a Redial Number in the Phonebook20
To Delete a Redial Number21
To Delete All Redial Numbers21
To Store a New Number22
Using the Phonebook22
To Call a Stored Number23
To Edit a Phonebook Entry23
To Delete a Phonebook Entry24
To Delete All Phonebook Entries24
Caller Display25
To Check Caller Display Records26
To Return a Call26
To Store a Caller Display Number in the Phonebook26
To Delete a Caller Display Record27
To Delete All Caller Display Records27
Using a Multi-Handset System28
To Make an Intercom Call28
To End an Intercom Call28
To Answer an Intercom Call29
To Transfer a Call29
To Toggle between Two Calls30
To Set up a Three-Way Conference30
To End the Conference30
New Call Tone31
To Page All Handsets from the Base Unit31
Answering Machine Setup32
The Telephone Answering Modes32
To Change Answering Mode32
The Outgoing Message33
To Record a New Outgoing Message33
Setting the Ring Delay34
Call Screening35
To Switch Call Screening on or off35
Answering Machine Operation36
Turn the Answering Machine on or off36
Message Playback37
To Playback Recorded Messages37
To Record a Memo38
Remote Operation39
To Activate Remote Control39
To Play Messages Remotely40
Custom Settings44
Earpiece Volume44
Key Beep45
Display Language46
Recall Time47
The Master PIN48
Using Reset49
Default Settings50
Troubleshooting51
Cleaning and Care56
EC Declaration of Conformity56
Guarantee and Service57
Technical Details58
Registering New Handsets59
To Register a New Handset59
Registration Failed60
To De-Register a Handset61
To Register to a Different Brand of Base Unit61
Index62

Binatone iDECT V2i System - Page 42

Table of Contents

Related product manuals