VD (E2.1) 10/2011 page 12/83
Symbol on the type plate Information
CE conformity marking
Electrical and electronic equipment manufactured / placed on the
market in the EC after 13 August 2005 and to be disposed of in a
separate collection according to directive 2002/96/EC on waste
electrical and electronic equipment (WEEE).
VDE-GS certification mark
The equipment is certified in the GOST R certification system of
GOSTSTANDARD Russia.
LABORATORY EQUIPMENT
43KM
(VD-UL only)
The equipment is certified by Underwriters Laboratories Inc.
®
according to standards UL 61010A-1, UL 61010A-2-10, CSA C22.2
No. 1010.1-92, and CSA C22.2 No. 1010.2.010-94.
1.5 General safety instructions on installing and operating the vacuum drying
oven
With regard to operating the vacuum drying oven VD and to the installation location, please observe the
guideline BGI/GUV-I 850-0 on safe working in laboratories (formerly BGR/GUV-R 120 or ZH 1/119
laboratory guidelines issued by the employers’ liability insurance association) (for Germany.
BINDER GmbH is only responsible for the safety features of the unit provided skilled electricians or
qualified personnel authorized by BINDER perform all maintenance and repair, and if components
relating to chamber safety are replaced in the event of failure with original spare parts.
To operate the unit, use only original BINDER accessories or accessories from third-party suppliers
authorized by BINDER. The user is responsible for any risk caused by using unauthorized accessories.
CAUTION
Danger of overheating.
Damage to the unit.
∅ Do NOT install the oven in unventilated recesses.
Ensure sufficient ventilation for dispersal of the heat.
Do not operate the vacuum drying oven VD in hazardous locations.
DANGER
Explosion hazard.
Danger of death.
∅ Do NOT operate the unit in potentially explosive areas.
KEEP explosive dust or air-solvent mixtures AWAY from the unit.
The vacuum drying oven VD is regularly equipped with a large-surface area safety valve. The window,
manufactured in toughened safety glass, is elastic-mounted and serves as a safety valve in the event of
explosion. The additional plastic panel provides splinter protection.
To Next Page
Loading...
