Binder APT.line VD - Disposal; Disposal of the Transport Packing; Decommissioning

VD (E2.1) 10/2011 page 68/83
The authorization number must be applied to the packaging in such a way that it can be easily
recognized or be recorded clearly in the delivery documents.
For security reasons we cannot accept a unit delivery if it does not carry an authorization
number.
18. Disposal
18.1 Disposal of the transport packing
Packing element Material Disposal
Straps to fix packing on pallet Plastic Plastic recycling
Non-wood (compressed
matchwood, IPPC standard)
Wood recycling Wooden transport box (option)
with metal screws
Metal Metal recycling
Solid wood (IPPC standard) Wood recycling Pallet
with foamed plastic stuffing
PE foam Plastic recycling
Cardboard Paper recycling Shipping box
with metal clamps
Metal Metal recycling
Top cover Cardboard Paper recycling
Cardboard Paper recycling Removal aid
(size 115)
Plastic Plastic recycling
Edge protection Styropor
®
or PE foam Plastic recycling
Protection of doors PE foam Plastic recycling
Bag for operating manual PE foil Plastic recycling
Insulating air cushion foil (packing of
optional accessories)
PE foil Plastic recycling
If recycling is not possible, all packing parts can also be disposed of with normal waste.
18.2 Decommissioning
• Turn off the main power switch (1) (position 0).
When turning off the main power switch (1), the stored parameters remain saved.
• Close the inert gas supply:
VD23: Close the fine dosing valve (4) for inert gas / ambient air supply.
VD53, VD115: Close the fine dosing valve (6) for inert gas supply.
Through the open inert gas connection, inert gas can enter the vacuum drying oven and escape into
the ambient air.
WARNING
Release of inert gas.
Danger of poisoning.
 When decommissioning the VD vacuum drying oven, turn off the inert gas supply at
the inert gas valve (4) or (6).