Binder APT.line VD - Page 4

83 pages

Save Page as PDF

To Next Page

To Previous Page

VD (E2.1) 10/2011 page 4/83

D-78532 Tuttlingen, 03.08.2011

BINDER GmbH

P. M. Binder

Geschäftsführender Gesellschafter

Managing Director

Directeur général

Dr. H. von Both

Leiter F & E

Director R & D

Chef de service R&D

3 / 3

Main Page

EC - Declaration of Conformity2
Product Registration5
Table of Contents6
Safety8
Legal Considerations8
Structure of the Safety Instructions8
Signal Word Panel8
Safety Alert Symbol9
Pictograms9
Word Message Panel Structure10
Localization / Position of Safety Labels on the Unit10
Type Plate11
General Safety Instructions on Installing and Operating the Vacuum Drying Oven12
Intended Use14
Description of the Equipment14
Overview of the Equipment15
VD 23 Control Panel16
VD 53 / 115 Control Panel16
Connections at the Rear of the Unit17
Completeness of Delivery, Transportation, Storage, and Installation18
Unpacking, and Checking Equipment and Completeness of Delivery18
Guidelines for Safe Lifting and Transportation19
Storage19
Location of Installation and Ambient Conditions19
Installation and Connections20
Vacuum Expansion Racks20
Electrical Connection21
Vacuum Connection21
Inert Gas Connection22
Start up22
Settings at the RD3 Program Controller22
General Indications24
Fixed Value Entry Mode25
Week Program Editor26
Program Table Template for Week Program Editor28
Programming Example of the Week Program Editor29
Desired Time Function29
Proceeding Overview29
Proceeding in Detail30
Program Editor35
Selecting between Set-Point Ramp and Set-Point Step35
Programming with Setting "Ramp" (Default Setting)35
Programming with Setting "Step37
General Notes on Programming Temperature Transitions38
Set-Point Entry for Program Operation38
Program Table Template41
Deleting a Program Section42
Program Start Level43
User Level46
Performance in Case of Failures52
Performance after Power Failure52
Alarm Messages52
Safety Device Class 2 (Din 12880)52
Reference Measurements. Checking the Temperature in the Inner Chamber53
Commissioning the Vacuum54
Evacuation54
Breaking the Vacuum (Flooding)55
Operation with Inert Gas55
Switching Contacts 24V DC Via Operation Lines55
Options57
Connection Kit VD (Option)57
Vacuum Module Empty (Without Pump) (Option)57
Vacuum Module with Chemical Membrane Pump VP 1.1 or VP 2.1 (Option)59
Vacuum Module with Speed Controlled Chemical Membrane Pump VP 3.1 and Vacuum Controller (Option)61
Digital Pressure Display (Option)63
Additional Measuring Channel for Digital Object Temperature Display with Flexible Pt 100 Temperature Sensor (Option)63
Measuring Access Port Vacuum 9 Poles (Option)64
Communication Software APT-COM™ 3 Datacontrolsystem (Option)65
Protocol Printer (Available Via BINDER INDIVIDUAL Customized Solutions)65
Maintenance, Cleaning, and Service66
Maintenance Intervals, Service66
Cleaning and Decontamination66
Sending the Unit Back to BINDER Gmbh67
Disposal68
Disposal of the Transport Packing68
Decommissioning68
Disposal of the Unit in the Federal Republic of Germany69
Disposal of the Unit in the Member States of the EC Except for the Federal Republic of Germany70
Disposal of the Unit in Non-Member States of the EC71
Troubleshooting72
Technical Description73
Factory Calibration and Adjustment73
VD Technical Data74
Equipment and Options75
Spare Parts77
Dimensions VD 2378
Dimensions VD 5379
Dimensions VD 11580
Contamination Clearance Certificate81

Binder APT.line VD - Page 4

Table of Contents

Related product manuals