Binder APT.line VD - Page 76

VD (E2.1) 10/2011 page 76/83
Regular equipment (continued)
Inert gas connection with fine-dosing valve
Analog pressure display (manometer) (not with option digital pressure display)
Measuring connection (DN 16), rear
Safety glass panel
2 switching contacts 24V DC via operation lines
Intelligent adaptation of the heating power by soft heating-up function (selectable on-off)
Options / accessories
Expansion racks, aluminum or stainless steel 1.4571
FKM door gasket (temperature resistant up to 200 °C / 392°F)
Additional measuring channel for digital object temperature display with flexible Pt 100 temperature
sensor
Digital pressure display (adjustable)
Communication software APT-COM™ for logging and display of temperature data and networking up to
30 units with PC
Protocol printer for numeric and graphic temperature documentation (BINDER Individual)
2-channel pen recorder, external (BINDER Individual)
Connection kit VD with various small flange parts
Measuring access port vacuum 9 poles
Vacuum module empty (without pump)
Vacuum module with chemical membrane pump VP 1.1 (MZ2C) with separator and emission condenser,
ready for connection
• Ready to connect: Suction power
m
3
/h 2.0
• End vacuum
mbar / inHg 7 / 0.21
• Electrical connection (50-60 Hz)
V 115 / 230
Vacuum module with chemical membrane pump VP 2.1 (MD4C) with separator and emission condenser,
ready for connection
• Ready to connect: Suction power
m
3
/h 3.4
• End vacuum
mbar / inHg 1.5 / 0.04
• Electrical connection (50-60 Hz)
V 115 / 230
PC 3004 Vario: Vacuum module with speed controlled chemical membrane pump VP 3.1 (MD4C Vario)
with separator and emission condenser including all necessary connection parts, and
Digital vacuum controller CVC 3000 (measuring accuracy of ≤ 1mbar / 0.03 inHg) for accurate control of
vacuum, with interface RS232 for APT-COM™ DataControlSystem software.
• Suction power
m
3
/h 4.6
• End vacuum
mbar / inHg 1.5 / 0.04
• Electrical connection (50-60 Hz)
V 115 / 230
Program controlled venting (available via BINDER Individual)
Factory calibration certificate
Extension to factory calibration certificate (additional value)
Factory calibration certificate for digital object temperature display
Factory calibration certificate for digital pressure display
Extension to factory calibration certificate for digital pressure display (additional pressure)
Qualification folder
Evaporating dish with rim, small or large
Stable table on wheels with castors and locking brakes