Operating instructions iS10 / iS20 Maintenance
38019417000 en 101
12
12
Maintenance
12.1 Cleaning
Cover device when building is cleaned.
For cleaning, it is not permitted to use:
– Sharp, hard or pointed objects
– Water or steam jet devices
– Compressed air
– Cleaning agents that are hazardous to health or that contain solvents
12.1.1 Display and operating unit
Clean with a soft, lint-free, damp cloth. Do not use abrasive agents. The cleaning agent
must be compatible with foodstuffs.
12.1.2 Stainless steel surfaces
Devices made of stainless steel are extremely weather resistant and therefore suitable for
most environmental conditions. However, stainless steel can corrode as well (rust). If rust
appears on the surface, this is surface rust and does not come from the material itself.
This rust is a result e.g. of contact corrosion for example.
Maintenance information for stainless steel
Bizerba only uses high-quality stainless steels. To avoid the formation of rust on high-qual-
ity steel parts the device should not be treated to substances containing chloride (e. g.
cleaning agents or disinfectants) and should not be exposed to a chloride atmosphere. If
this cannot be avoided, immediately rub steel parts with cleaning oil. This is absolutely
necessary to prevent rust formation.
Cleaning oil: e. g. Bizerba service oil (material number 94008900022). The cleaning oil
complies with the German Food and Commodities Act (LBMG, §5, para. 1, sentence 1),
fulfils the requirements of the "guidelines of sec. 21 CFR 178.3570 of FDA regulations"
and has an H1 approval according to USDA.
To Next Page
Loading...
Need help?
General
