Operating instructions iS10 / iS20 Service menu
38019417000 en 93
9
9.4 Switch settings of hardware seal
The hardware seal (slide switch) is located under the protective cover.
Fig. 24: Switch settings of hardware seal
Slide switch on left hand side = not verified
Slide switch on right hand side = verified
9.5 Hardware seal settings
Status of hardware
seal
Slide
switch
Changes
flashes
Display
Scales pa-
rameters
Calibra-
tion
metrologically ap-
proved
right No No No
not metrologically ap-
proved
left Yes Yes Yes
Call-up of service parameters, see page 26.
Call-up of metrology status, see page 26.
To Next Page
Loading...
Need help?
General
