Operating instructions iS10 / iS20 Operation
38019417000 en 33
5
Consecutive number not found
Key Display presentation Process description
The entered number was not found.
Return to weighing mode with
.
Input of consecutive number with
.
Change of decades with or .
Start search with
.
Overview of 6-digital number
1s digit
100s digit
100,000s digit
Fig. 12: Overview
5.10 Call up tendency control
In many weighing applications, the factor of interest is not the absolute weight of the prod-
uct but the deviation of this weight from a target value. Such applications are for example
the weight control of equal weight packages or the process control of parts in a production
process.
To Next Page
Loading...
Need help?
General
