Operating instructions iS10 / iS20 Ethernet interface
38019417000 en 75
8
8 Ethernet interface
Only for iS20.
The device can be optionally equipped with an Ethernet interface for connection of PC/
EDP. Transmission rates of 10 MBit/s and 100 MBit/s are supported in the IPv4 address
space.
8.1 Performance of Ethernet interface
The device may be operated with a nominal load of 16.8% at a maximum of 25,000 pack-
ages per second. Exceeding the maximum possible nominal load ends the connection with
the network. After 30 s the device attempts to re-establish the connection between scale
and PC.
8.2 Ethernet interface parameters
Menu call-up only via restart, see page 26.
Save data in EEPROM: Press
key.
Fig. 20: Display: "EtHEr"
For input of numbers change the tens digit, see page 27.
Selection Subselection Display Explanation
or
80 00
Ethernet interface
00
off
(communication via serial interface)
01
UDP with fixed IP address
02
TCP/IP server with fixed address
(1 client maximum)
03
UDP with DHCP
04
TCP/IP server with DHCP
(1 client maximum)
To Next Page
Loading...
Need help?
General
