Safety instructions Operating instructions VS12 /C /F /F-P /W
3 - 2 6.080.98.5.10.13 en
3
3.2 Safety instructions for transport and installation
CAUTION Carriage might move due to its unladen weight.
Risk of hand injuries due to crushing!
–
Be careful when unpacking.
3.3 Safety instructions during operation, slicing
WARNING Rotating blade!
Cut-injuries.
–
Do not allow yourself to become distracted. Concentrate on the
task in hand and avoid time pressure.
– Do not put your hand underneath the remnant holder plate.
– Never push product ends towards blade by hand.
CAUTION There are spikes on the product holder!
Risk of injury.
–
Use handle when working with product holder.
– Before you begin slicing, always position the product holder on or
behind the product.
3.4 Safety instructions for sharpening, cleaning
WARNING Unprotected blade!
Coming in contact with the sharp blade can lead to serious inju-
ries.
–
Always wear cut-proof gloves during the cleaning and sharpening
procedures and shoes with toe caps when the blades are replaced.
– Do not clean the blades when operating the machine.
To Next Page
Loading...
Need help?
General
