Operating instructions VS12 /C /F /F-P /W Technical data
6.080.98.5.10.13 en 9 - 7
9
Work area:
Length
= 672 mm = 26.5"
Width
= 755 mm = 29.7"
Weight
= approx. 45 kg = 99 lb
Blade diameter = 330 mm = 13"
Blade speed = 266 rpm
max. product size, diam-
eter
= 224 mm = 8.8"
Max. product height = 260 x 224 mm = 10.2" x 8.8"
Slice thickness setting = 0.5 to 24 mm = 0.02" to 0.95", stepless
Types of current, voltag-
es, power consumptions
= see rating plate
9.7 Supply voltage
Technical data of power supply
– Mains supply
Single-phase alternating current, see rating plate
– Permissible mains voltage tolerance (static) normal
At 100 to 240 V: +6% to -10% of nominal value
– Mains frequency: 50 (60) Hz
Permissible tolerance of mains frequency: +2% to -2% of nominal value
–
Leakage current protective conductor max.: 3.5 mA
9.8 Ambient conditions
– Surrounding temperature
for operation and storage: -10 to +40°C (+14 to +104 degF)
– Humidity
Protection type IP 33. High air humidity and condensation can result in damage to the
machine.
– Relative humidity
for operation and storage: 90 % (condensation of the unit is not permissible)
– Air convection
Free air convection must be able to form around the device in order to avoid over-
heating.
– Required lighting
500 Lux
To Next Page
Loading...
Need help?
General
