Maintenance Operating instructions VS12 /C /F /F-P /W
8 - 6 6.080.98.5.10.13 en
8
8.3 Cleaning
CAUTION Splash water!
If water gets into the machine it can damage electric components.
–
Do not clean machine with a steam jet or similar device!
– Use only a moist, not wet, cleaning cloth.
– Cover the machine when the surroundings are cleaned with spray
and/or pressurized water.
Removed parts
Fig. 43: Removed parts
Clean removed parts in warm water us-
ing a soft cleaning agent. Leave to dry in
the air.
Blade cleaning
Fig. 44: Blade cleaning
Press a wet disposable cleaning cloth
against the blade surface and slowly
wipe away from the center.
Clean the back of the blade in the same
manner.
After this process, repeat using a dry
disposable cleaning cloth.
To Next Page
Loading...
